In the Factory, the Weight of a Machine Tool Varies, Ranging from Hundreds of Kilograms to Hundreds of Tons. Most of These Machine Tools Have a Service Life of More Than 100 Years. They Are Spare Parts when They Leave the Factory. After They Are Transported to the Factory, They Will Be Assembled into a Formed Machine Tool. During Use, Some Factories Need to Be Hoisted and Moved Elsewhere Due to Rent Expiration, Environmental Pollution, Rental, Maintenance and Other Reasons.

Guanhang Chain Block and Crane Jointly Lift Large Tonnage Machine Tools

This Task Cannot Be Completed Quickly by Manpower Alone. Therefore, the Factory Will Entrust the Lifting and Handling Company or Purchase Lifting Equipment to Lift the Machine Tool. for Any Purpose, Placing a Small Gantry Crane on the Upper Part of the Machine Tool and Hanging the Crown and Navigation Hand Pull Gourd on the Gantry Crane Are Good Lifting and Moving Methods.

The Picture Above Shows the Scene of a Hoisting Company Using the Newly Purchased Guanhang Chain Block to Hoist the Machine Tool. the Workers Wear Safety Helmets, Fix the Upper Hooks of Four Chain Blocks of the Same Specification and Model on the I-beam Respectively, Use the Lower Hooks of the Chain Block to Lift the Four Corners of the Machine Bed, and then Arrange Four Workers to Pull the Hand Zipper at the Same Time, the Machine Tool Will Be Lifted to a High Place Smoothly.