The driving method of a chain hoist is to pull the zipper strip, which requires vertical pulling to minimize resistance. However, both diagonal and horizontal pulling can cause some wear and tear to the chain hoist. However, there is a problem with vertical pulling, which is that the operator must stand below the chain hoist.

You should know that the lower part of the chain block is not a safe point. If the brake system of the chain block fails, it is very likely to be injured by a sudden falling heavy object. To avoid this situation, a 360 ton rotating chain block has emerged. The biggest feature of this chain block is that the cover of the chain block can rotate 360 degrees, which allows the chain block to be pulled in any direction.

Before carrying out the operation, we only need to twist the cover and align the hole of the hand zipper strip with a certain direction according to our own needs to pull it. This way, we don't need to stand under the chain hoist for quick operation, but can stand on one side and pull diagonally or horizontally. This design greatly ensures the safety of the lifting operation of the chain hoist.

However, in the end, Crown Airlines would like to remind you that before pulling the chain hoist vertically, it is necessary to perform a sensitivity test on the self-locking of the chain hoist in order to ensure its safe operation.